1. AntennaMastsRus
#ad
Premium Reception, AntennaMastsRus, The Original 6 3/4 Inch is Compatible with Toyota Tundra 2000-2020, Internal Copper Coil, German Engineered, Car Wash Proof Short Rubber Antenna
#ad
Strength - 304 stainless steel threading; made in wisconsin! the connection to your truck is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Its strength is tried, so much so that we guarantee and replace any that break in a car wash within 2 full years from purchase date.
More information #ad
Car wash proof – car washes are grave yards for antennas! just time before long factory antennas bend and snap! our redesigned 6 3/4" effective 02/11/2019 now stouts a new level of strength, we'll issue a replacement. Rest assured our stainless steel threading will confidently secure your new antenna. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. If it breaks, Tested and Proven. Unmatched reception / promised performance - our 6 3/4" german engineered antenna uses choice quality materials, including a highly conductive Internal Copper Coil. The quality level of our 6 3/4" must not be confused with attempted duplicates. If you're not 100% satisfied with performance, return your antenna for a full refund!
| Brand | AntennaMastsRus #ad |
| Manufacturer | AntennaMastsRus #ad |
| Part Number | A010-TY-7 |
| Model | 4332950218 |
| Warranty | 1 Year Replacement Warranty |
More information #ad
2. RYDONAIR
#ad
Rydonair Antenna Compatible with Toyota Tundra 2014-2019 | 13 inches Flexible Rubber Antenna Replacement | Designed for Optimized FM/AM Reception
#ad
Reception: designed for either AM or FM bands. It performs better in reception than other low profile antennas. It may seem as though it is too small because it drops right into the hole when you first try to install.
More information #ad
Fits through: 2014-2020 Toyota Tundra truck. Flexible material: allows shape memory so antenna springs back into shape when bent. Installation: the base of toyota tundra has the threaded hole recessed deep into the hole the antenna sits in. Low profile 13” stylish look: improve the look of your Tundra by replacing your 31” long metal shaft antenna.| Brand | RYDONAIR #ad |
| Manufacturer | Rydonair #ad |
| Weight | 0.12 Pounds |
| Part Number | RD-RMRNT |
| Model | 8542133210 |
More information #ad
3. EcoAuto
#ad
Antenna Ornament for 2007-2012 Toyota Tundra, Toyota Genuine Accessory 86392-0C040 Manual Radio Antenna Mounted Base Bezel
#ad
Easy & quick installation: this vehicle antenna ornament can be Easily Installed Within Minutes. Fine craftsmanship: the tundra vehicle antenna ornament is Meticulously Crafted Using Premium Quality Material For Required Durability and Long-Lasting Use.
More information #ad
Compatibility of antenna adapter base: check first! as our Product May Fit One or more Vehicles, Please Refer to the Amazon Parts Finder Tool to see if this Antenna Base does fit your vehicle. It will last Just as long as an original part. Perfect antenna ornament replacement: each antenna ornament replacement Measures 3. 8” x 2. 1” x 05” and is intended to be compatible with 2007-2012 OEM Toyota Tundra. Simply remove the old original One And Push Ornament In The Antenna.
| Brand | EcoAuto #ad |
| Manufacturer | EcoAuto #ad |
| Height | 0.5 Inches |
| Length | 3.8 Inches |
| Width | 2.1 Inches |
| Part Number | ANT-TNDR-01 |
| Model | 6543832871 |
More information #ad
4. Trunknets Inc
#ad
TrunkNets Inc 6 3/4″ Antenna MAST – FITS : Toyota Tundra 2007 08 09 10 11 12 13 14 15 2016 2017 2018 2019 2020
#ad
More information #ad
Fm stations are getting near 100% same Reception as Factory 31" inch Antenna. So please consider this before buying.| Brand | Trunknets Inc #ad |
| Manufacturer | Trunknets Inc #ad |
| Height | 0.55 Inches |
| Length | 6.1 Inches |
| Weight | 0.1 Pounds |
| Width | 5.87 Inches |
| Part Number | Ant_Tun0718 |
| Model | Ant_Tun0718 |
More information #ad
5. RYDONAIR
#ad
Rydonair Car Wash Proof Antenna Compatible with Toyota Tundra Tacoma FJ Cruiser | Designed for Optimized FM/AM Reception
#ad
Reception: designed for either AM or FM bands. The carbon fiber column on the bottom helps the base holding onto the mount and also offers stylish looking.
More information #ad
Flexible material: Premium Rubber outer construction for weather resistance & durability. Car wash safety guarantee: we guarantee and replace any that break in a car wash within 2 years from purchase date. It performs better in reception than other low profile antennas.| Brand | RYDONAIR #ad |
| Manufacturer | Rydonair #ad |
| Part Number | RD-T7S |
More information #ad
6. VOFONO
#ad
VOFONO 7 Inch Car Wash Proof Replacement Antenna Fits 2000-2019 Toyota Tundra
#ad
Not including antenna adapter base. Premium meterial: the antenna is designed with premium metal and wrapped by flexible rubber, ensure the resistance and durability. Carwash proof: this antenna supports automatic car wash and manual car wash.
More information #ad
Never break and fade. It will not fade break or chip. It is firmly fixed and stable during use to prevent loosening. Notice: functional and intended for AM/FM radio signal, do not compatible with satelite radio and GPS system. The replacement antenna is easy to install by hand in 30 seconds.| Brand | VOFONO #ad |
| Manufacturer | Early Bus #ad |
| Height | 0.5 Inches |
| Length | 7 Inches |
| Weight | 0.1 Pounds |
| Width | 0.5 Inches |
| Part Number | ZZL3791 |
More information #ad
7. AntennaMastsRus
#ad
15 Inch Black Antenna is Compatible with Toyota Celica, Highlander, Sienna, RAV4, MR2, Tundra, Sequoia, Tacoma, T100, 4 Runner Spring Steel, FJ Cruiser, AntennaMastsRus
#ad
More information #ad
| Brand | AntennaMastsRus #ad |
| Manufacturer | AntennaMastsRus #ad |
| Part Number | A207-TY |
| Warranty | 1 Year Replacement Warranty |
More information #ad
8. OxGord
#ad
For 07-13 Toyota Tundra Truck Accessories, Antenna Ornament Base Grommet Bezel, Mount Radio Mast Replaces OEM Replacement Parts 86392-0C040, Best for AM / FM Antennas Stereo Receiver Repair Kit
#adOxGord #ad - Easy to install: User friendly instructions are included. Please keep in mind that this is not an antenna, but the rubber piece that surrounds the area where it connects the antenna connects to the vehicle.Dimensions: 3. 8 x 4. 5 x 1. 2 inches. You’ll get a longer life out of the replacement, then you did from the original piece.
More information #ad
Check first: please refer to the Amazon Parts Finder Tool to see if this item fits your vehicle. Replacement: designed to fit and replace your old OEM part. Durable: utilizing high quality material and a superb design, cracks, this ornament is incredibly resistant to breaks, and fading.| Brand | OxGord #ad |
| Manufacturer | OxGord #ad |
| Height | 1.25 Inches |
| Length | 3.75 Inches |
| Width | 4.5 Inches |
| Part Number | FBA_ABTY-TNDR-0713 |
| Model | ABTY-TNDR-0713 |
More information #ad
9. CravenSpeed
#ad
CravenSpeed Stubby Jr Antenna Replacement for Toyota Tundra and Tacoma | 2 inches
#ad
There is no risk to try it out and see for yourself. Install in seconds: you won't need any tools.
More information #ad
Made in usa: each stubby jr is made here in the us of A. These mini antennas are machined and powder-coated in good ol' Portland, OR. The stubby jr is easy to install by hand in a matter of seconds. Reception is key: the fact is that most people get great radio reception.| Brand | CravenSpeed #ad |
| Manufacturer | CravenSpeed #ad |
| Height | 2 Inches |
| Length | 0.63 Inches |
| Width | 0.63 Inches |
| Part Number | CRTT-0017-TUN99 |
| Model | 4333124421 |
More information #ad
10. Tekk
#ad
TEKK Short Antenna Compatible with 1999-2020 Toyota Tundra| Designed for Optimized FM/AM Reception | 4.8 Inches
#ad
It is time to replace this antenna for your car now! Sleek and modern style: replace your ugly factory antenna with this stylish 4. 8 inches short antenna. Durable quality: made of premium abs plastic material with surface spray coating treatment, wear resistant and corrosion resistant, to ensure maximum strength and durability for long lasting usage.
More information #ad
Unmatched reception : teek antenna use highly conductive double copper internals, which can improve the sound quality of strong signal radio station and the ability of interference resistance. No modification, or drilling required. Just unscrew your existing antenna and screw this in place by hand. We through years test and achieve its real reception results. Improve the look of your vehicle. No more worrying about your OEM Antenna being broken when entering the garage or covering the car. Easy installation: it's easy to install within a minute, cutting, No-Tool Required.
| Brand | Tekk #ad |
| Manufacturer | TEKK #ad |
| Part Number | EK168KK |
| Model | 1999-2020 Toyota Tundra |
More information #ad