Top 10 Hobart Plasma Cutter – Plasma Cutting Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Hobart

#ad

Model:500576, Hobart AirForce 40i Plasma Cutter

#ad
Hobart #ad - Dual-voltage capability with mvp multi-voltage plug- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.

Power factor correction pfc circuitry - draws up to 30% less amperage for the same cutting range as compared to the competition. Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released. Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine. Xt40r torch- designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips. Pfc expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
BrandHobart #ad
ManufacturerHobart Welding Products #ad
Part Number500576
Model500576
WarrantyHobart 5/3/1

2. Hobart

#ad

Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V

#ad
Hobart #ad - No gas pressure settings for flame tuning needed. Smaller heat-affected zone for less warping. Cuts faster than oxy fuel. More precise cut, thinner kerf, less slag to clean up. Built in Air Compressor.
BrandHobart #ad
ManufacturerHobart #ad
Height11.25 Inches
Length16.5 Inches
Weight31 Pounds
Width18.5 Inches
Part Number500564
Model500564
Warranty5-3-1 Warranty

3. Hobart

#ad

Hobart AirForce 27i Plasma Cutter

#ad
Hobart #ad - Pfc expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops. Power factor correction pfc circuitry - draws up to 30% less amperage for the same cutting range as compared to the competition.

Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released. Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine. Dual-voltage capability with mvp multi-voltage plug- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle. Xt30r torch- designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips.
BrandHobart #ad
ManufacturerHobart Welding Products #ad
Part Number500575
Model500575
WarrantyHobart 5/3/1

4. Hobart

#ad

Hobart 500566 Airforce 40i Plasma Cutter 240V

#ad
Hobart #ad - Max. Fan-on-demand: the fan only runs when needed, reducing the dust and debris that is pulled into your machine. Cuts faster than oxy fuel.

Auto-refire technology - Allows operator to cut expanded/perforated metals, as well as painted or coated surfaces. Open-circuit voltage:400v. Wind tunnel technology - Prevents abrasive dust and particles from damaging internal components. Ergonomic trigger safety, more efficient air consumption, and XT40R torch consumables. Airforce 40i plasma cutter is excellent for light and heavy industrial users. Maximum cutting of mild steel is 7/8 in at 50% duty cycle. Operates off 240 v input power.
BrandHobart #ad
ManufacturerHobart #ad
Height11.63 Inches
Length17 Inches
Weight34.3 Pounds
Width18.25 Inches
Part Number500566
Model500566
Warranty5-3-1 Warranty

5. Hobart

#ad

Hobart 500565 Airforce 27i Plasma Cutter 120/240V

#ad
Hobart #ad - Wind tunnel technology - prevents abrasive dust and particles from damaging internal components. Plasma material thickness: 1/4 inches to 3/8 inches. Xt30r torch with 12 ft lead and consumables. Fan-on-demand - runs only when needed reducing dust/debris pulled into unit. Multi-voltage plug mvp allows you to connect to 120 V or 240 V power. More precise cut, thinner kerf, less slag to clean up. Excels at cutting 3/8 in mild steel, can sever 5/8 in mild steel.
BrandHobart #ad
ManufacturerHobart #ad
Height14.25 Inches
Length11.25 Inches
Weight32.1 Pounds
Width8.25 Inches
Part Number500565
Model500565
Warranty5-3-1 Warranty

6. LOTOS

#ad

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" Clean Cut

#ad
LOTOS #ad - The compatible consumables sets for this brown color lt5000d plasma cutter are "lcs22" or "lcs33". Safe and at low cost: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, copper, mild steel, alloy steel, and aluminum.

Package includes: power supply, ground clamp, instruction Manual, plasma cutting torch, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, etc. Setup within 1 min: the pre-installed npt 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. Output & performance: 10-50 a dc output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V.

Please search "lotos lcs22" or "lotos lcs33"; it cannot compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. Papst advanced cooling system: ensure the plasma cutter have a stable and durable high performance. Uses non-hazardous compressed air to cut, Mild Steel, Alloy Steel, Copper, Aluminum, safe and at low cost. The whole machine can be setup quickly within 1 min. Air plasma cutter: suitable cutting for stainless steel, etc. Engine power : Electric AC.
BrandLOTOS #ad
ManufacturerLOTOS #ad
Height26 Inches
Length10 Inches
Weight22.5 Pounds
Width13 Inches
Part NumberLT5000D
ModelLT5000D

7. LOTOS

#ad

Dual Voltage 110V/220V, Brown, Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, 1/2 Inch Clean Cut

#ad
LOTOS #ad - 10-35a dc output, alloy steel, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Papst advanced cooling system: ensure the plasma cutter have a stable and durable high performance. Package includes: power supply, pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, instruction manual, ground clamp, Plasma cutting torch, etc.

The whole machine can be setup quickly within 1 min. Setup within 1 min: the pre-installed npt 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. Suitable cutting for stainless Steel, etc. Papst advanced German Cooling System. Buy with confidence: we offer 30 days refund and 1-year, please submit registration form on our website. Max severance Thickness: 3/4".

Dual voltage input: automatic dual voltage / Dual Frequency 110/120 V 220/240 V 50/60Hz. Uses non-hazardous compressed air to cut, Aluminum, safe and at low cost. 50 amp digital Inverter Air Plasma Cutter. Safe and at low cost: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, mild steel, copper, alloy steel, and aluminum. Output & performance: 10-50 a dc output, mild steel, copper, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240v.
BrandLOTOS #ad
ManufacturerLotos Technology #ad
Height12 Inches
Length15 Inches
Weight19.4 Pounds
Width6 Inches
Part NumberLTP5000D
ModelF6-LLBG-D35Z
Warranty1 Year Warranty

8. Hobart

#ad

Hobart 500554 Handler 190 MIG Welder 230V

#ad
Hobart #ad - To 5/16in. Powerful and professional Results. Welds 24 ga. 25 to 190 output amperage. 7 voltage selections, enhanced magnetics and infinite wire feed speed control offers easier fine control of the output parameters for improved arc performance with less spatter. Steel in single pass. 30% duty cycle @ 130 Amps. Operates on 230V power.
BrandHobart #ad
ManufacturerHobart #ad
Height18.7 Inches
Length24.2 Inches
Weight78 Pounds
Width13.3 Inches
Part Number500554
Model500554
Warranty5 year limited warranty

9. LOTOS

#ad

Dual Voltage 110V/220V, LOTOS LTP5500D Non-Touch Pilot Arc Plasma Cutter, Brown 55AMP Digital

#ad
LOTOS #ad - Setup within 1 min--the per-installed npt 1/4” industry type d plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The non-hf start torch with central connector save your time to connect the torch to your plasma cutter.

Non-hf--non-hf blowback Start, there is no HF interference. Package includes-- power supply, consumables, blowback non-hf start cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator. The whole machine can be setup quickly within 1 min. 20-55 a dc output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120v. Naturally, but when they crop up, our customer support is there to help! we will provide the Best solution for you. 20-35a dc output, copper, Mild Steel, safe and at low cost. Satisfaction guaranteed--with confidence, we hope you don't encounter any problems, as we offer 30-days refund/replacement and 1 year warranty.

Suitable cutting--for stainless Steel, Alloy Steel, etc. Input & output--automatic dual voltage / dual frequency 110/120 220/240 v 50/60hz. Feel free to contact us--our customer Care team is always ready to help. Portable and powerful--the ltp5500d can easily cut 3/5” 15 mm metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.
BrandLOTOS #ad
ManufacturerLotos Technology #ad
Height12 Inches
Length16 Inches
Width7.1 Inches
Part NumberLTP5500D

10. Hypertherm

#ad

Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead

#ad
Hypertherm #ad - Duramax lt torch design provides a sure, comfortable grip made from heat and impact resistant material. Duramax lt torch design provides a sure, comfortable grip made from heat and impact resistant material.

Auto-voltage automatically adapts to 110 V - 240 V input power. Plug adapters included. Plug adapters included. Comes with hard carry case, eye shields, shoulder strap, gloves, standard consumables and Fine Cut consumables. Auto-voltage automaticvally adapts to 110 V - 240 V input power. Comes with hard carry case, shoulder strap, ehe shields, gloves, standard consumables and FineCut consumables.
BrandHypertherm #ad
ManufacturerHypertherm #ad
Height11.5 Inches
Length14 Inches
Weight2.2 Pounds
Width5.5 Inches
Part Number088079
Model088079