Top 10 CV Joint Puller – Puller Sets

As an Amazon Associate I earn from qualifying purchases.

1. 8MILELAKE

#ad

8MILELAKE CV Joint Puller Propshaft Separator Tool Universal CVJ CV Axle Puller Removal Tool

#ad
8MILELAKE #ad - Keeps hands free for releasing retaining circlip. Saves on labour time and suitable for most vehicles. Maximum cvj diameter: 95mm. Length: 230mm. Package includes: 1pcs CV joint puller tool. Quickly removes the cv joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height5.91 Inches
Length9.84 Inches
Weight1.76 Pounds
Width3.15 Inches
Part NumberSZ
ModelRemoval

2. ABN

#ad

ABN Inner CV Axle Removal Tool, CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

#ad
ABN #ad - Drop-forged steel slide hammer weight provides a secure grip; Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Easy to use attach the inner cv axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot; Slide the 5 lb hammer weight back and forth to create torque to pull out the axle; Use lubricant fluid for added ease not included.

Fits your needs chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm roughly 2-inch opening and a 2. 5-inch depth to fit your needs. Safe for your vehicle slide hammer cv joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint; Pulls CV joints on 1986-current Taurus/Sable.

Built to last hardened hammer shaft provides strength and durability, while the T-handle and 5 lb. Remove front wheel drive axles easily to replace or repair your cv axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set; The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
BrandABN #ad
ManufacturerABN #ad
Height5 Inches
Length26 Inches
Weight8.29 Pounds
Width3 Inches
Part Number5574

3. OTC

#ad

OTC 7507 CV Joint Fork Removing Adapter

#ad
OTC #ad - Designed to be used with OTC slide hammer number 1155. It can also be used in conjunction with OTC extension number 7508 or both.
BrandOTC #ad
ManufacturerOTC #ad
Height0.75 Inches
Length11.25 Inches
Weight0.85 Pounds
Width5.37 Inches
Part Number7507
Model7507
WarrantyLimited lifetime warranty

4. CTA Tools

#ad

CTA Tools 1040 CV Joint Puller Adapter with Wide Opening

#ad
CTA Tools #ad - Black finish. Use with cta #A4905/8"-18 thread. Forged steel construction. 2-1/2"/63mm wide opening.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Weight0.65 Pounds
Part Number1040
Model1040

5. ABN

#ad

CV Axle Removal Tool CV Joint Slide Hammer Adapter, ABN Front Wheel Drive Axle Pulley Attachment

#ad
ABN #ad - Built to last heat-treated cv puller adapter with black oxide finish ensures optimal strength and durability while resisting rust and corrosion; Inner CV axle removal tool has 48mm roughly 2-inch opening and a 2. 5-inch depth to fit your needs.

Remove front wheel drive axles easily to replace or repair your constant velocity CV axle joints, use the ABN Front Wheel Drive Axle Puller Attachment; Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles. Works with your slide hammer the cv joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps; Fits slide hammers with 5/8-inch x 18 threads. Easy to use attach the inner cv removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot; Use the slide hammer to create torque to pull out the axle; Use lubricant fluid for added ease not included.

Safe for your vehicle unlike pry bars or cv axle fork tools, the cV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint; Pulls CV joints on 1986-current Taurus/Sable.
BrandABN #ad
ManufacturerABN #ad
Height1.5 Inches
Length5 Inches
Weight0.9 Pounds
Width5 Inches
Part Number5543

6. ABN

#ad

Universal Joint Removal Tool 17mm+, ABN CV Joint Puller Tool CV Joint Tool – CVJ CV Axle Removal Tool, CV Axle Puller

#ad
ABN #ad - Fits your vehicle: includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars; Fits most vehicles equipped with constant velocity U-joints. Adjust the diameter: 07-inch 17mm clamping bar minimum shaft diameter; works on cv joint shafts with 07-inch 17mm or larger diameters of the groove where the rubber boot is clamped to the shaft; We recommend an 18mm or 19mm minimum shaft diameter to ensure a good bite on the shaft Requires rings to hold on to; Not designed for use on smooth shafts.

Safe: handsfree operation allows you to easily release the retaining circlip; Reduces the risk of damaging the joint, transmission, or other parts; Collar ring opening accommodates axle and allows it to pass through measure your application to ensure exact fitment.

Built to last: body constructed from zinc-plated steel, Bar constructed from black-oxide coated steel for maximum strength and longevity that resists rust and corrosion. Rebuild your car: the abn | cv puller is a prop shaft puller and cv joint remover that allows you to crimp clamps on driveshaft axle boots and rebuild front half shafts; 9. 4-inch x 5. 75-inch 23. 9cm x 14. 6cm overall dimensions with 3. 7-inch 95mm maximum CV joint diameter.
BrandABN #ad
ManufacturerABN #ad
Height2.3 Inches
Length5.9 Inches
Weight1.94 Pounds
Width10.2 Inches
Part Number5272

7. ABN

#ad

2 Piece Inner CV Axle Removal Tool Set CV Popper Wedge and Shim Ball Joint Separator Tools, ABN Axle Popper Kit

#ad
ABN #ad - Fits your needs solid steel fork design has a 2-inch 5. 1cm opening space to fit around your CV axle shaft; Both the wedged and the shim split ends have a 1/2-inch 1. 3cm width and a 2. 5-inch 6. 4cm length; popper wedge starts at a depth of 1/4-inch to fit into tight spaces when working.

Easy to use insert the wedge wheel bearing tool between the transaxle case and the axle joint with the forked ends surrounding the shaft; Strike the end of the fork to release the half shaft; Use the shim popper to fill in larger gaps found on some vehicles. Remove cv axle joints effortlessly skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, and use the ABN 2 Piece Axle Popper Forks Ball Joint Press Kit to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles.

Built to last package includes a 14 inch long 35. 6cm wedged cv axle fork and a 14 inch long 35. 6cm sham spacer fork; constructed of drop-forged steel with a metallic finish, these CV joint puller ball joint tools provide maximum strength and durability. Safe for your vehicle forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safe release unlike pry bars and slide hammers; Two piece CV axle popper tool kit ensures fitment for most FWD vehicles.
BrandABN #ad
ManufacturerABN #ad
Height1.5 Inches
Length14.5 Inches
Width4 Inches
Part Number5918

8. Generic

#ad

Propshaft Separator Removal Puller Splitter Slitting Car Garage Pro Tool

#ad
Generic #ad - Quickly removes the cv joint from drive shaft without damaging the joint, and keeps hands free for releasing retaning circlip. And you will receive it in one week. Save on labour time and suitable for most vehicles. Reduces risk of damage to transmission. The items you ordered will be shipped out in 1-2 business day from Los Angeles,CA.
BrandGeneric #ad
ManufacturerGeneric #ad
Part NumberGeneric

9. CTA Tools

#ad

CTA Tools 4245 CV Joint Puller

#ad
CTA Tools #ad - Whether tuning up your ‘68 corvette or changing the Oil on a John Deere Tractor, CTA Can Supply You with the Tools Needed to do the Job. Prevents damage to the Roller Bearing Inside the Joint. Use with cta tools 4310 Axle Puller. Heavy-duty construction Allows for Strength and Durability. Pulls cv joints with Hidden Retaining Rings.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Height2 Inches
Length8.25 Inches
Weight1 Pounds
Width5.5 Inches
Part Number4245
Model4245

10. OEM TOOLS

#ad

OEMTOOLS 27058 Front Wheel Drive Axle Pulley Attachment

#ad
OEM TOOLS #ad - 1/2 in drive chamfered square drive. Black oxide Finish to Resist Rust. Heat-treated for Strength. Use with oemtools 27033 Slide Hammer.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.25 Inches
Length8.5 Inches
Weight1.13 Pounds
Width5.5 Inches
Part Number27058
Model27058
WarrantyOEM Limited Lifetime