13/16in Socket 1/2in Drive, ABN 11.5in Strut Spring Compressor Tool – Set of 2 Pair – Macpherson Spring Compression#adABN #ad - Easy storage: heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Wide range of compatibility: universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11.
5-inch threaded rods for 10-inch to 105-inch maximum opening to fit jaws to coils Wide jaws with standard diameter of approximately 6 inches OD front coil springs. Locks into place: acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
Easy to use: use the abn 11. 5” inch strut spring compressor tool – set of 2 pair – macpherson spring compression, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, strut tubes, 13/16” socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.
2. Orion Motor Tech#ad
Coil Spring Compressor Tool, Orion Motor Tech Macpherson Strut Spring Compressor,13/16in Socket 1/2in Drive#adOrion Motor Tech #ad - 2. Click the seller name and enter the store page. 3. Click "Ask a question". If you are not satisfied with this product or if you have any question, please feel free to contact us. Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11. 5-inches threaded rods for 10-inches to 105-inches maximum opening to fit jaws to coils Wide jaws with standard diameter of approximately 6 inches OD front coil springs.
Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. Orion motor tech pursue outstanding quality and 2-year warranty service, only have point of departure, there is no terminal point. 1.
|Brand||Orion Motor Tech #ad|
|Manufacturer||Orion Motor Tech #ad|
1/2in Drive Internal Strut Compressor Tool, Heavy Duty Steel Hook to Hold Auto Car Spring Safely, SURGEDO Coil Spring Compressor Remover Installer Tool Kit#adSURGEDO #ad - Strength and durability: forged structures allow for repair of bent struts, strut tubes and damaged parts. Please use anti-sticking agent to lubricate the thread and prolong the service life. Wide compatibility: the strut spring compressor is used for the repair and replacement of shock absorbance, struts and springs.
Unique design: internal compressor adopts inner coil spring for easy disassemble, it is more efficient than traditional two pieces spring compressors.
Easy to use: 1/2" drive compression disc spring to replace shock absorber unit or spring. Using it to remove and install automotive coil springs up to 5-5/8”O. D, designed to grasp a maximum 3/4” wire diameter spring. Thickened thread design to ensure durable and strength. The coil compressor hook holds the spring tightly by rotating the easy-to-use hex nut.
Coil Compressor Suspension Spring Compressor, ABN Coil Spring Compressor Tool, Coil Tool Coil Spring Compression Tool#adABN #ad - Fits your ride: safely compress “loose” coil springs no shock in the middle of the spring and the main coils between the upper/lower control arms on most vehicles and light trucks with an arm coil spring front suspension If it has coil springs, this coil spring tool will work; Not intended for McPherson strut springs or shocks; We do not recommend using on coil springs with special coatings, as it may damage the coating and cause the spring to fail.
Easy storage: heavy-duty 13” x 2. 5” x 7. 8” inch 33cm x 6. 4cm x 19. 8cm plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization. Built to last: constructed from heavy-duty metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion; Between uses, we recommend cleaning and applying anti-seize compound lubrication to the screw shaft threads of this automotive spring compressor to prolong the life of the center screw; Not intended for use with impacts tools damage to threads may occur.
Easy to use: instructions not included; insert this coil springs compressor through the center of the coil spring, ensure that the compressor washers are sitting in recessed area of fork, insert fork through lowest coil possible and make sure fork straddles the screw shaft and sits evenly on coil, engage the hooks with screw shaft centered so both hooks grip a coil towards top of spring, compress spring by slowly tightening screw shaft clockwise while ensuring hooks do not rotate on springs.
Universal, Spring Compression Tool, Shankly Coil Spring Compressor Tool 2 Pieces#adShankly #ad - Strong and durable: shankly’s coil spring compressor has a drop forged enamel body and is composed of top quality materials, giving the mechanic confidence spring compressor jobs will be done right.
10 inch bolt provides max height of removable spring at 9 ½ inches. Easy to use: shankly’s spring strut compressor is simple to operate, allowing the mechanic to get the job done right and then move on.
Shankly’s strut spring compressor features double ended jaws with attachable security hooks for added safety and control. Versatile tool: shankly’s strut compressor works as a spring compressor for struts and other coil springs on most passenger and light commercial vehicles, providing the mechanic a versatile compressor solution.
6. OEM TOOLS#ad
OEMTOOLS 27035 Coil Spring Compressor#adOEM TOOLS #ad - Aid in the Installation of Coil Spring. Slide hammer is required for use with oem #27129 Rear Axle Bearing Puller, OEM #27184 2/3 Jaw Puller. Slide hammer is required for use with oem #27032 Axle Puller, OEM #27049 Pilot Bearing Puller. Comes in sturdy Blow-mold Storage Case.
|Brand||OEM TOOLS #ad|
|Manufacturer||Great Neck Saw #ad|
|Warranty||OEMTOOLS Limited Lifetime|
8MILELAKE 14inches Coil Spring Compressor Strut Remover Installer Tool Kit#ad8MILELAKE #ad - Use externally to Compress MacPherson Strut Coil Springs. Permits quick and Safe Removal or Installation of Springs. Drop forged jaws & lead screws screws 350mm/14 inch both heat treated to ensure professional performance.
Heat-Treated Steel | Strut, Hiltex 50604 10" Coil Spring Compressors | Hardened, Auto Suspension Remover and Installer Kit#adHiltex #ad - Compressors are designed to maintain and preserve spring curvature while compressing. Permits quick and safe removal or installation of springs while repairing struts; Minimum tensile strength of bolts and 105, 000 PSI. Bolts are made with a hardened and tempered, precision-machined steel with a black oxide finish that prevents corrosion and rust.
|Manufacturer||Ridgerock Tools Inc. #ad|
DASBET 2pcs Macpherson Strut Spring Compressor300mm with Detent Pins#adDASBET #ad - Forged hooks and Hardened Center Screw. Do not use with impact driver tools. If you think the item you received is used, please contact us for a replacement. Safer spring compression with the Broad Spring Contact.
8MILELAKE Macpherson Strut Spring Compressor#ad8MILELAKE #ad - The broad spring contact and built in detent pins help to lock the spring into place for safer. Replacement of the strut cartridge or strut assembly repair.