TEKTON 66061 1/16-Inch Roll Pin Punch

#ad
Michigan Industrial Tools 66061 #ad - Made in USA. Precisely machined to a reverse taper, the tip is just a bit wider than the rest of the shaft. Made from premium, high carbon steel. Made from premium, hardened tip while keeping the soft temper of the striking end, high carbon steel, each punch is individually heat treated creating a strong, allowing it to absorb hammer blows without chipping.

The guide ball tip self centers for perfect alignment in pin, shoulder in full, even contact with pin wall to prevent slipping or damage. This eliminates the possibility of it sticking in the pin hole. Classic natural finish has a dry-touch, rust-preventative coating. Ideal for machine, small equipment, and gun service and repairs, the TEKTON 1/16 inch Roll Pin Punch smoothly drives out or inserts hollow pins or springs without deforming them.

TEKTON 66061 1/16-Inch Roll Pin Punch #ad - Individual heat treatment allows careful control of tip hardness and temper of striking end. Reverse taper shaft with self-centering guide ball tip drives out or inserts hollow pins without deforming them or sticking in workpiece. Straight and true, tip is precisely machined to meet exacting tolerances.

More information about Michigan Industrial Tools 66061 #ad

HIVIZ Ruger LCR Front Sight, Green

#ad
HiViz NPLCR2010-G #ad - Hi-viz, green, fits Ruger LCR, sight, front only. Fits the ruger lcr and lcrx in. 38,. 357 and 9mm caliber. Rsr group is a nationwide distributor of firearms and shooting sports accessories. Steel base. Due to manufacturing tolerances, some firearms may require additional fitting. Hiviz recommends gunsmith installation for all dovetail sights.

Base is pre-drilled for easy installation. Fits ruger LCR revolvers. This product is manufactured in United States. Lightpipe has a square profile. This product is manufactured in United States. It does not fit the LCR 22 or 22 Mag. Rsr group is a nationwide distributor of firearms and Shooting sports accessories.

More information about HiViz NPLCR2010-G #ad


Similar products:


TEKTON 66051 1/16-Inch Pin Punch

#ad
Michigan Industrial Tools 66051 #ad - Made from premium, high carbon steel. Fits the ruger lcr and lcrx in. 38,. 357 and 9mm caliber. This eliminates the possibility of it sticking in the pin hole. Base is pre-drilled for easy installation. Fits ruger LCR revolvers. Lightpipe has a square profile. Straight and true, tip is precisely machined to meet exacting tolerances.

This product is manufactured in United States. Precisely machined to exacting size tolerances, the tip is reverse tapered, making it just a bit wider than the rest of the shaft. Steel base. Hiviz recommends gunsmith installation for all dovetail sights. Made in USA. Classic natural finish has a dry-touch, rust-preventative coating.

TEKTON 66051 1/16-Inch Pin Punch #ad - Ideal for machine, and gun service and repairs, small equipment, the TEKTON 1/16 inch Pin Punch smoothly drives out or inserts solid pins without damaging or deforming them. Due to manufacturing tolerances, some firearms may require additional fitting. Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece.

It does not fit the LCR 22 or 22 Mag. Rsr group is a nationwide distributor of firearms and Shooting sports accessories.

More information about Michigan Industrial Tools 66051 #ad


Similar products:


Xs Std Dot Tritium Rug Lcr

#ad
XS Sight Systems RP-0008N-4 #ad - Excels in high stress defensive situations. Enhances sight acquisition in all light conditions. It does not fit the LCR 22 or 22 Mag. Rsr group is a nationwide distributor of firearms and Shooting sports accessories. Xs standard dot tritium front Sights are the finest sights made for fast sight acquisition in all light conditions.

Improves low-light accuracy. 38/. 357 only. Base is pre-drilled for easy installation. Fits ruger LCR revolvers. Features: - enhances sight acquisition in all light conditions - excels in high stress defensive situations - Improves Low-Light accuracy - Low profile, snag free design Specifications: - Front Sight Only - Fits: Ruger LCR 38/357 Not.

Xs Std Dot Tritium Rug Lcr #ad - 22 or 9mm - front sight: Standard Dot Tritium - Diameter: 0140" - material: blued steel - finish: matte Black - Includes: Front Sight Installation Kit Fits the ruger lcr and lcrx in. 38,. 357 and 9mm caliber. Steel base. Straight and true, tip is precisely machined to meet exacting tolerances. Classic natural finish has a dry-touch, rust-preventative coating.

More information about XS Sight Systems RP-0008N-4 #ad


Similar products:


Starrett 565A 4" Overall Length, 9/16" Pin Length, 1/16" Pin Diameter, Drive Pin Punch

#ad
The L. S. Starrett Company LS565A #ad - The starrett 565a drive pin punch has a 4" overall length with a 9/16" pin length and 1/16" pin diameter to push pins and rivets into or out of a workpiece. Lightpipe has a square profile. Made from premium, high carbon steel. Improves low-light accuracy. Classic natural finish has a dry-touch, rust-preventative coating.

Excels in high stress defensive situations. It has a round shank, which is knurled for grip. Due to manufacturing tolerances, some firearms may require additional fitting. Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece. Drive pin punch with 4" overall length, 9/16" pin length, and 1/16" pin diameter pushes pins and rivets into or out of a workpiece.

Starrett 565A 4" Overall Length, 9/16" Pin Length, 1/16" Pin Diameter, Drive Pin Punch #ad - Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Steel base. The punch is made from hardened and tempered steel components that provide wear resistance and strength. Pin punches are used to insert or knock out rivets and pins in assemblies. Hiviz recommends gunsmith installation for all dovetail sights.

More information about The L. S. Starrett Company LS565A #ad


Similar products:


TEKTON 66052 3/32-Inch Pin Punch

#ad
Michigan Industrial Tools 66052 #ad - Straight and true, tip is precisely machined to meet exacting tolerances. Drive pin punch with 4" overall length, 9/16" pin length, and 1/16" pin diameter pushes pins and rivets into or out of a workpiece. It does not fit the LCR 22 or 22 Mag. Rsr group is a nationwide distributor of firearms and Shooting sports accessories.

Steel base. Made from premium, high carbon steel. Made from premium, hardened tip while keeping the soft temper of the striking end, each punch is individually heat treated creating a strong, high carbon steel, allowing it to absorb hammer blows without chipping. Made in USA. Fits ruger LCR revolvers. Individual heat treatment allows careful control of tip hardness and temper of striking end.

TEKTON 66052 3/32-Inch Pin Punch #ad - . Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece. Made from premium, high carbon steel. Excels in high stress defensive situations. Precisely machined to exacting size tolerances, the tip is reverse tapered, making it just a bit wider than the rest of the shaft. Fits the ruger lcr and lcrx in.

More information about Michigan Industrial Tools 66052 #ad


Similar products:


Dasco Pro 250 Roll Pin Punch, 1/16-Inch

#ad
Dasco Pro, Inc 250 #ad - Our 89 year legacy brand incorporates time tested design, superior materials and distinguishing technology. Precision machined Roll Pin Punches are specifically designed to remove spring/roll pins. Straight and true, tip is precisely machined to meet exacting tolerances. Excels in high stress defensive situations.

Fits ruger LCR revolvers. Individual heat treatment allows careful control of tip hardness and temper of striking end. Designed and manufactured in the USA. Made from premium, high carbon steel. Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece. Base is pre-drilled for easy installation.

Dasco Pro 250 Roll Pin Punch, 1/16-Inch #ad - Offers a broad range of forged hand tools used for carpentry, masonry and demolition. Dasco pro offers a range of punch point sizes to accurately fit the pin size to be removed. The punch shaft allows for a long, straight removal of the pin without damaging the pin wall material. Individual heat treatment allows careful control of tip hardness and temper of striking end.

Hardened and tempered steel provides wear resistance and strength. The heat treated point has a rounded nib to center the point into the pin allowing the point shoulder to maintain maximum contact.

More information about Dasco Pro, Inc 250 #ad


Similar products:


Hogue Ruger LCR No Finger Groove Rubber Tamer Cushion Grip Black 78030

#ad
Hogue 78030 #ad - Round shank is knurled for grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that out perform all other makes. Features:- fits: ruger lcr - no finger groove- Rubber - Tamer Cushion Grip - Color: Black Fits the ruger lcr and lcrx in. 38,. 357 and 9mm caliber.

Features a soft rubber insert on the inside of the grip at the backstrap. Made of high carbon steel that has been heat treated. Straight and true, tip is precisely machined to meet exacting tolerances. Made from premium, high carbon steel. Lightpipe has a square profile. 38/. 357 only. The heat treated point has a rounded nib to center the point into the pin allowing the point shoulder to maintain maximum contact.

Hogue Ruger LCR No Finger Groove Rubber Tamer Cushion Grip Black 78030 #ad - Designed and manufactured in the USA. Hogue's tamer grips feature a soft rubber insert on the inside of the grip at the back-strap - where it does its recoil absorbing duties underneath OverMolded Rubber. Enhances sight acquisition in all light conditions. Individual heat treatment allows careful control of tip hardness and temper of striking end.

Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel without affecting accuracy.

More information about Hogue 78030 #ad


Similar products:


7 piece -Gunsmith Tools & Accessories - SRS7 - SHORT Roll Steel Spring Punch Set - Grace USA - Steel Punches - Gunsmithing

#ad
Pro Ears SRS7 #ad - Improves low-light accuracy. Round shank is knurled for grip. Steel base. Classic natural finish has a dry-touch, rust-preventative coating. Enhances sight acquisition in all light conditions. Made from quality 5/16 Hex stock. Straight and true, tip is precisely machined to meet exacting tolerances. Made of high carbon steel that has been heat treated.

Designed and manufactured in the USA. Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece. Features a soft rubber insert on the inside of the grip at the backstrap. Straight and true, tip is precisely machined to meet exacting tolerances. The srs7 is designed to start the difficult roll spring/pins in motion without causing any damage to the pins or punch.

7 piece -Gunsmith Tools & Accessories - SRS7 - SHORT Roll Steel Spring Punch Set - Grace USA - Steel Punches - Gunsmithing #ad - Classic natural finish has a dry-touch, rust-preventative coating. The short shaft provides more control; putting your hand closer to the pin, so you don't bend a finishing punch. Due to manufacturing tolerances, some firearms may require additional fitting. Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece.

Individual heat treatment allows careful control of tip hardness and temper of striking end. This product is manufactured in United States.

More information about Pro Ears SRS7 #ad


Similar products:


TEKTON 66053 1/8-Inch Pin Punch

#ad
Michigan Industrial Tools 66053 #ad - Straight and true, tip is precisely machined to meet exacting tolerances. Round shank is knurled for grip. Features a soft rubber insert on the inside of the grip at the backstrap. Ideal for machine, and gun service and repairs, small equipment, the TEKTON 1/8 inch Pin Punch smoothly drives out or inserts solid pins without damaging or deforming them.

Base is pre-drilled for easy installation. The heat treated point has a rounded nib to center the point into the pin allowing the point shoulder to maintain maximum contact. Fits ruger LCR revolvers. Fits the ruger lcr and lcrx in. 38,. 357 and 9mm caliber. Made in USA. Individual heat treatment allows careful control of tip hardness and temper of striking end.

TEKTON 66053 1/8-Inch Pin Punch #ad - Due to manufacturing tolerances, some firearms may require additional fitting. Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece. This product is manufactured in United States. Individual heat treatment allows careful control of tip hardness and temper of striking end.

Hiviz recommends gunsmith installation for all dovetail sights.

More information about Michigan Industrial Tools 66053 #ad


Similar products:


Xs Big Dot Pinned S&W J-Frm/Rg Sp101

#ad
XS Sight Systems RV-0001N-3 #ad - Improves low-light accuracy. Green tritium inserts surrounded by a white outline to improve your sight picture in all conditions. Hiviz recommends gunsmith installation for all dovetail sights. Individual heat treatment allows careful control of tip hardness and temper of striking end. Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece.

Enhances sight acquisition in all light conditions. This is the ultimate self defense sight system that provides sights you can see around the clock. Steel base. Features: - enhances sight acquisition in all light conditions - excels in high stress defensive situations - Improves Low-Light accuracy - Low profile, snag free design Specifications: - Front Sight Only - Fits: Smith & Wesson J-Frame, Ruger SP101 - Gunsmithing Required - Front Sight: Big Dot Tritium - Diameter: 0

Xs Big Dot Pinned S&W J-Frm/Rg Sp101 #ad - 188" - material: blued steel - finish: matte Black - Includes: Front Sight Installation Kit Fits the ruger lcr and lcrx in. 38,. 357 and 9mm caliber. Classic natural finish has a dry-touch, rust-preventative coating. Hardened and tempered steel provides wear resistance and strength. Made in the USA.

More information about XS Sight Systems RV-0001N-3 #ad


Similar products: